D. Baudry, Conception, validation et exploitation d'un dispositif de mesure de champs électromagnétiques proches. Application : CEM, 2005.

D. Baudry, C. Arcambal, A. Louis, B. Mazari, and P. Eudeline, Applications of the nearfield techniques in EMC investigations, IEEE Transactions on Electromagnetic Compatibility, vol.49, issue.3, pp.485-493, 2007.

L. Bouchelouk, Conception et validation de sondes pour les mesures en champ proche, 2006.

M. Kanda, Standard probes for electromagnetic field measurement, IEEE Transactions on Antennas and Propagation, vol.41, issue.10, pp.1349-1364, 1993.

H. I. Bassen and G. S. Smith, Electric field probes-A review, IEEE Transactions on Antennas and Propagation, vol.31, issue.5, pp.710-718, 1983.

R. C. Rudduck, D. C. Wu, and M. Intihar, Near-field analysis by the plane wave spectrum approach, IEEE Transactions on Antennas and Propagation, vol.21, issue.2, pp.231-234, 1973.

A. Constantine, Antenna-Theory, analysis and design

H. Hosoyama, T. Iwasaki, and S. Ishigami, Complex antenna factor of a V-dipole antenna with two coaxial feeders for field measurements, IEEE Transactions on Electromagnetic Compatibility, vol.41, issue.2, pp.154-158, 1999.

H. Hosoyama, T. Iwasaki, and S. Ishigami, Evaluation of complex antenna factor of a dipole antenna by measuring the S-parameters of the balun, Electrical Engineering in Japan, vol.123, issue.2, pp.16-23, 1998.

D. Paris, W. Jr, E. B. Leach, and . Joy, Basic theory of probe-compensated near-field measurements, IEEE Transactions on Antennas and Propagation, vol.26, issue.3, pp.373-379, 1978.

J. J. Wang, An examination of the theory and practices of planar near-field measurements, IEEE Transactions on Antennas and Propagation, vol.36, issue.6, pp.746-753, 1988.

E. B. Joy and D. T. Paris, Spatial sampling and filtering in near-field measurement, IEEE Transactions on Antennas and Propagatiopn, vol.20, issue.3, pp.253-261, 1972.

A. Tankielun, U. Keller, W. John, and H. Garbe, Complex deconvolution for improvement of standard monopole near-field measurement results, 16 th International Symposium on EMC, 2005.

J. S. Dahele and A. L. Cullen, Electric probe measurements on micro-strip, IEEE Transactions on Microwave Theory and Techniques, vol.28, issue.7, pp.752-755, 1980.

J. Colinas, Etude et Amélioration des performances d'une méthode de mesure en champ proche: la méthode des courants magnétiques équivalents, 2001.

, System in Packages product: Technical information, Fujitsu Scientific & Technical Journal, vol.19, issue.1, 2001.

, Semiconductor Industry Association, Assembly & Packaging -The International Technology Roadmap for Semiconductors, 2005.

K. P. Slattery, J. W. Neal, and Z. Cui, Near-field Measurments of VLSI Devices, IEEE Transactions on Electromagnetic Compatibility, vol.41, issue.4, pp.374-384, 1999.

Y. Vives-gilabert, C. Arcambal, A. Louis, F. De-daran, P. Eudeline et al., Modeling Magnetic Radiations of Electronic Circuits Using Near-Field Scanning Method, IEEE Transactions on Electromagnetic Compatibility, vol.49, issue.2, pp.391-400, 2007.

P. Fernandez, C. Arcambal, D. Baudry, S. Verdeyme, and B. Mazari, Radiation modeling and electromagnetic simulation of an active circuit, 2009.

P. Fernandez, A. Ramanujan, Y. Vives, C. Arcambal, A. Louis et al., A radiated emission model compatible to a commercial electromagnetic simulation tool, 20 th International Symposium on EMC, 2009.

P. Fernandez, C. Arcambal, Y. Vives, A. Ramanujan, D. Baudry et al., Development of a magnetic field model and insertion into a commercial electromagnetic simulator, Turk. J. of Elec. Eng. Comp. Sci, vol.17, issue.3, pp.289-300, 2009.

Y. Vives-gilabert, Modeling radiated emissions of electronic components, 2007.

G. E. Forsythe, M. A. Malcom, and C. B. Moler, Computer methods for mathematical computations, 1977.

R. Penrose, A generalized inverse for matrices, Proc. Cambridge Phil. Soc, vol.51, pp.406-413, 1955.

G. E. Forsythe, M. A. Malcom, and C. B. Moler, Computer methods for mathematical computations, 1977.

K. Levenberg, A method for the solution s of certain problems in least squares, Quart. Appl. Math, vol.2, pp.164-168, 1944.

D. Marquardt, An algorithm for least-squares estimation of nonlinear parameters, SIAM J. Appl. Math, vol.11, pp.431-441, 1963.

J. J. Moré, The Levenberg-Marquardt algorithm: Implementation and Theory, Lecture notes in Mathematics, vol.630, pp.105-116, 1978.

Y. Vives, C. Arcambal, D. Baudry, A. Louis, B. Mazari et al., Characterisation of the magnetic field radiated by different toroidal core inductors, pp.29-34, 2005.

Y. Ahmed, Y. Hao, and C. Parini, A 31.5 GHz Patch Antenna Design for Medical Implants, International Journal of Antennas and Propagation, 2008.

B. Ulriksson, Conversion of frequency-domain data to the time-domain data, Proc. IEEE, vol.74, pp.74-77, 1986.

T. B. Hansen and A. D. Yaghjian, Planar near-field scanning in the time domain-Part 1: Formulation, IEEE Transactions on Antennas and Propagation, vol.42, issue.9, pp.1292-1300, 1994.

T. B. Hansen and A. D. Yaghjian, Planar near-field scanning in the time domain-Part 2: Sampling theorems and computation schemes, IEEE Transactions on Antennas and Propagation, vol.42, issue.9, pp.1280-1291, 1994.

, Programme VTT, document scientifique, 2010.

G. E. Moore, Cramming more components onto integrated circuits, vol.38, pp.114-117, 1965.

O. Langlois, E. Foch, X. Roboam, and H. Piquet, De l'avion plus électrique à l'avion tout électrique : état de l'art et prospective sur les réseaux de bord, J3eA, vol.4, 2005.

I. Chahine, Caractérisation et modélisation de la susceptibilité conduite des circuits intégrés aux perturbations electromagnétiques, 2007.

S. Atrous, Mise en place d'une méthodologie de caractérisation en immunité champ proche de dispositifs électroniques, 2009.

, National Instrument

P. F. Lopez, Modélisation du rayonnement électromagnétique des dispositifs électroniques pour des applications CEM, 2011.

C. Taylor and C. J. Harrison, The response of a terminated two-wire transmission line excited by a non-uniform electromagnetic field, IEEE Transactions Antennas and Propagation, vol.13, pp.987-989, 1965.

A. K. Agrawal, H. J. Price, and S. H. Gurbaxani, Transient response of multiconductor transmission lines excited by a nonuniform electromagnetic field, IEEE Transactions on Electromagnetic Compatibility, vol.22, issue.2, pp.119-129, 1980.

F. Rachidi, Formulation of the field-to-transmission line coupling equations in terms of magnetic excitation field, IEEE Transactions on Electromagnetic Compatibility, vol.35, issue.3, pp.404-407, 1993.

C. R. Paul, Analysis of multiconductor transmission lines, 2008.

M. V. Schneider, Dielectric loss in Integrated Microwave Circuits, The Bell System Technical Journal, pp.2325-2332, 1969.

C. E. Baum, T. K. Liu, and F. M. Tesche, On the analysis of general multiconductor transmission-line networks, vol.350, 1978.

F. M. Tesche, Development and use of the BLT equation in the time domain as applied to a coaxial cable, IEEE Transactions on Electromagnetic Compatibility, vol.49, issue.1, pp.3-11, 2007.

M. Leone and H. L. Singer, On the coupling of an external electromagnetic field to a printed circuit board trace, IEEE Transactions on Electromagnetic Compatibility, vol.41, issue.4, pp.418-424, 1999.

E. Sicard, A. Boyer, and A. Tankielun, On the prediction of near-field microcontroller emissions, IEEE International Symposium on EMC, 2005.

C. Labussière-dorgan, S. Bendhia, E. Sicard, J. Tao, H. J. Quaresma et al., Modeling the electromagnetic emission of a microcontroller using a single model, IEEE Transactions on EMC, vol.50, issue.1, pp.22-34, 2008.

F. Lafon, Développement de techniques et de méthodologies pour la prise en compte des contraintes CEM dans la conception d'équipements du domaine automobile : Etude de l'immunité, du composant à l'équipement, 2011.

S. Serpaud, J. L. Levant, M. Ramdani, R. Perdriau, and M. Drissi, ICEM-CE extraction methodology, th International Workshop on Electromagnetic Compatibility of Integrated Circuits (EMC COMPO 09), 2009.

, VIII.3.4 Programmes et projets de recherche collaboratifs

A. Projet, Active Probes for Measurement of Electromagnetic Near-field)

, Le seul partenaire de l'IRSEEM est l'équipe Antennes et Micro-ondes du département Electronique de l'Université du Kent. L'objectif principal du projet est le développement d'une sonde active (association d'un capteur et d'un amplificateur) de mesure du champ proche ayant de meilleures performances par rapport aux sondes passives utilisées dans les laboratoires de recherche. Cette tâche était dédiée à notre partenaire de l'université du Kent. L'IRSEEM avait comme mission la caractérisation de la sonde active. J'ai intégré l'IRSEEM en juillet, Le projet APMEN (juin 2005-juillet 2007) est un projet interrégional européen qui appartient au programme INTERREG IIIA, 2005.

, Plusieurs résultats ont été publiés dans le cadre de ce projet

, Projet COSIP (Chip/Package System Co-design)

, Le projet COSIP (juin 2008-mai 2011) est un projet européen qui appartient au programme MEDEA+. Les partenaires de l'IRSEEM sont Bosch

. Stmicroelectronics, On peut recenser de l'électronique numérique, de l'électronique analogique, de l'optique, voire même des microsystèmes mécaniques? La conception de tels systèmes se fait d'une manière fractionnée et/ou séquentielle dans laquelle l'influence mutuelle entre les différents composants sur la carte et/ou entre composants et boitier n'est pas du tout abordée. Du fait de la multidisciplinarité du projet, les partenaires étaient choisis sur la base de leurs domaines techniques de compétences qui étaient surtout complémentaires, Le projet était défini autour de la conception des systèmes dans un boîtier, connus sous le nom de circuits SiP

, L'objectif principal du projet était le développement et la validation d'une plate forme de simulation mixte compatible avec les approches multi-domaines et multi-technologies tenant compte de la puce, la carte et le boitier. Notre implication à l'IRSEEM

J. , en qualité d'enseignant-chercheur, le suivi des travaux de thèse de A. RAMANUJAN avec un taux d'encadrement de 90%

E. Projet, ElectroMagnetic Compatibility of Energetic system)

, Le projet était défini autour de la compatibilité électromagnétique des systèmes d'Energie. Il couvre plusieurs champs liés à la CEM des systèmes embarqués dans le domaine de l'automobile. En effet, la cohabitation entre des systèmes d'électronique de puissance (systèmes de conversion d'énergie) et d'électronique de signal, Le projet ECEM (décembre 2010-décembre 2013) est un projet ANR qui appartient au programme VTT (Véhicule pour les transports terrestres). Les partenaires de l'IRSEEM sont des industriels : le coordinateur du projet VALEO (Créteil)

, L'objectif du projet est de s'assurer du respect des normes CEM (émissions parasites et immunité face aux perturbations EM) pour garantir le bon fonctionnement de l'ensemble des équipements dans un environnement EM relativement pollué. L'implication de l'IRSEEM dans ce projet se résumait à la

J. , à la définition des objectifs techniques de la partie IRSEEM dans ce projet et j'ai assuré, par la suite, en qualité d'enseignant-chercheur, le suivi des travaux de thèse de H. SHALL avec un taux d'encadrement de 70%. J'ai également encadré la stagiaire K

, Plusieurs publications de type journal et conférence

S. Projet, Simulation de l'Emission et de l'Immunit des Systèmes et des Modules Electroniques)

, Le projet SEISME (avril 2011-avril 2014) est un projet appartenant au programme FUI (Fonds Unique Interministériel). Les partenaires de l'IRSEEM sont des industriels : le coordonateur EADS IW (Toulouse), AIRBUS (Toulouse)

, En effet, les modules et systèmes électroniques peuvent être amenés à subir des modifications quasi-permanentes au niveau de leurs composants et leurs cartes, principalement à cause de l'obsolescence. Cela conduit [R3] Zouheir RIAH "Caractérisation de résonateurs en structure planaire par l'application de la méthode spectrale, Le contexte du projet est la CEM des systèmes électroniques embarqués dans les applications des domaines automobile et aéronautique, 2000.

H. Shall, Z. Riah, and M. Kadi, A novel approach for modeling near-field coupling with PCB traces, IEEE Transactions on Electromagnetic Compatibility, vol.56, issue.5, pp.1194-1201, 2014.
URL : https://hal.archives-ouvertes.fr/hal-02306921

H. Shall, Z. Riah, and M. Kadi, A 3D Near-Field Modeling Approach for Electromagnetic Interference Prediction, IEEE Transactions on Electromagnetic Compatibility, vol.56, issue.1, pp.102-112, 2014.
URL : https://hal.archives-ouvertes.fr/hal-02306926

A. Ramanujan, Z. Riah, and A. Louis, Modeling the time-harmonic electromagnetic emissions of microwave circuits, IEEE Transactions on Electromagnetic Compatibility, vol.54, issue.2, pp.254-261, 2012.

Z. Riah, D. Baudry, M. Kadi, A. Louis, and B. Mazari, Post processing of electric field measurements to calibrate a near field dipole probe, IET Science, Measurement & Technology, vol.5, issue.2, pp.29-36, 2011.
URL : https://hal.archives-ouvertes.fr/hal-02306941

R. Brahimi, A. Kornaga, M. Bensetti, D. Baudry, Z. Riah et al., Postprocessing of near-field measurement based on neural networks, IEEE Transactions on Instrumentation and Measurement, vol.60, issue.2, pp.539-546, 2011.

B. Ravelo, Z. Riah, D. Baudry, and B. Mazari, E-field extraction from Hx-and Hy-near field values by using plane wave spectrum method, European Physical Journal Applied Physics (EPJAP), vol.53, issue.1, pp.1-10, 2011.

A. Ramanujan, Z. Riah, A. Louis, and B. Mazari, Computational optimizations towards an accurate and rapid electromagnetic emission modeling, Progress in Electromagnetic Research B (PIER B), vol.27, pp.365-384, 2011.

A. Ramanujan, Z. Riah, A. Louis, and B. Mazari, Modeling the electromagnetic radiation of passive microwave components using a near-field scanning method, IEEE Transactions on Electromagnetic Compatibility, vol.52, pp.1056-1059, 2010.

D. Baudry, M. Kadi, Z. Riah, C. Arcambal, Y. Vives et al., Plane wave spectrum theory applied to near-field measurements for EMC investigations, IET Science, Measurement & Technology, vol.3, issue.1, pp.72-83, 2009.

L. Bouchelouk, Z. Riah, D. Baudry, M. Kadi, A. Louis et al., Characterization of electromagnetic fields close to microwave devices using electric dipoles probes, International Journal of RF and Microwave Computer-Aided Engineering, vol.18, issue.2, pp.146-156, 2008.

, Chapitres d'ouvrage

S. Khemeri, A. Ramanujan, M. Kadi, and Z. Riah, Chapitre 3. Méthode de caractérisation de l'environnement électromagnétique dans des circuits hyperfréquences encapsulés dans des cavités métalliques, Les systèmes mécatroniques embarqués 1 : analyse des causes de défaillances, fiabilité et contraintes, COLLECTION GÉNIE MÉCANIQUE ET MÉCANIQUE DES SOLIDES, iSTE éditions, 2015.

A. Ramanujan, Z. Riah, A. Louis, and B. Mazari, An integrated development environment for modeling the radiated electromagnetic emissions, Interference Technology, pp.84-91, 2011.

M. Vincent, M. Klingler, Z. Riah, and Y. Azzouz, Influence of Car Body Materials on the Common-Mode Current and Radiated Emissions Induced by Automotive Shielded Cables, IEEE International Symposium on Electromagnetic Compatibility-EMC Europe, 2015.
URL : https://hal.archives-ouvertes.fr/hal-02419080

H. Shall, Z. Riah, and M. Kadi, Prediction of 3D-Near Field Coupling between a Toroïdal Inductor and a Transmission line, IEEE International Symposium on Electromagnetic Compatibility, 2013.

S. Khemeri, A. Ramanujan, M. Kadi, A. Riah, and . Louis, Estimation of the electromagnetic field radiated by a microwave circuit encapsulated in a rectangular cavity, IEEE International Symposium on Electromagnetic Compatibility, 2011.

A. Ramanujan, Z. Riah, A. Louis, and B. Mazari, On the radiated emission modeling of on-chip microwave components, IEEE International Symposium on Electromagnetic Compatibility, 2010.

, Autres conférences internationales

A. Ramanujan, H. Shall, Z. Riah, F. Lafon, and M. Kadi, From complex near-field measurements to radiated emissions modeling of electronic equipments, Int. Symp. Electromagn. Compat, 2014.

A. Hamouda, Z. Riah, F. Ndagijimana, and S. Serpaud, Development of electronic board conducted emissions model EBEM-CE using the bottom-up approach, Int. Symp. Electromagn. Compat, 2014.

H. Shall, K. Alameh, Z. Riah, A. Alaeddine, and M. Kadi, A tridimentional radiated emission model based on an improved near field scan technique, Int. Conf. on Green Energy, ICGE2014, 2014.

H. Shall, Z. Riah, and M. Kadi, Near-Field Coupling Model of a Non-Uniform External Electromagnetic Field to a Printed Circuit Board Trace, ICEAA 2013, 2013.

H. Shall, Z. Riah, and M. Kadi, Prediction of electromagnetic interferences between components and transmission lines, 2012.

A. Ramanujan, Z. Riah, A. Louis, and B. Mazari, A fully automatic model predicting the electromagnetic radiations of high frequency electronic devices, Progress In Electromagnetic Research Symposium, 2011.

A. Ramanujan, Z. Riah, A. Louis, and B. Mazari, A generic parametric model to predict the radiated emissions from near-field measurements, Embedded systems Workshop 2EMC, 2010.

S. Gueye, B. Dakyo, J. Raharijaona, D. Baudry, Z. Riah et al., Analyse, identification and modelling of electromagnetic disturbance sources. Actual signal approach applied to power supply unit, Compatibility and Power Electronics, CPE '09, pp.20-22, 2009.

Z. Riah, R. Sommet, J. C. Nallatamby, M. Prigent, and J. Obregon, Coherent tools for physics-based simulation and characterization of noise in semiconductor devices oriented to nonlinear microwave circuit CAD, SPIE 2 nd Annual Symposium, Fluctuations and Noise, 2004.

, Conférences nationales avec comité de lecture

A. Hamouda, Z. Riah, F. Ndagijimana, and S. Serpaud, Utilisation du zero-padding dans la modélisation des émissions rayonnées des cartes électroniques avec la méthode de spectre d'ondes planes, CEM 2014, Juillet, 2014.

W. Labiedh, H. Shall, J. Ben-hadj, Z. Slama, M. Riah et al., Etude comparative de deux méthodes inverses basées sur la technique champ proche, CEM 2014, 2014.

H. Shall, L. Leyssenne, Z. Riah, and M. Kadi, Modélisation 3D du rayonnement pour une meilleure prédiction du couplage EM entre structures électroniques et lignes de transmission, 2012.

A. Ramanujan, Z. Riah, A. Louis, and B. Mazari, Modélisation des émissions rayonnées électromagnétiques champ-proche des composants microondes miniatures, 15 ème colloque international et exposition sur la compatibilité électromagnétique (CEM 2010), 2010.

Z. Riah, R. Sommet, and R. Quéré, Boite à outils Scilab simulation physique-simulation circuit : comparaison des méthodes temporelle et fréquentielle, XIV-Journées Nationales Microondes (JNM), 2005.

Z. Riah, R. Sommet, and R. Quéré, Approche clients-serveurs sur la grille de calcul, XIII-Journées Nationales Microondes (JNM), 2003.
URL : https://hal.archives-ouvertes.fr/hal-01279212

A. Hamouda, Z. Riah, and F. Ndagijimana, Calcul du champ électromagnétique en champ lointain par la méthode du spectre d'ondes planes, GDR ondes, Octobre, 2013.

Z. Riah, R. Sommet, J. C. Nallatamby, M. Prigent, R. Quéré et al., Ensemble d'outils cohérents pour la simulation physique et la caractérisation du bruit dans les composants semi-conducteurs dédiés à la CAO des circuits micro-ondes non linéaires, Workshop AS Bruit organisé par le CNRS, Grand motte, 2004.