Z. A. Munir, U. Anselmi-tamburini, and M. Ohyanagi, The effect of electric field and pressure on the synthesis and consolidation of materials: A review of the spark plasma sintering method, Journal of Materials Science, vol.41, pp.763-777, 2006.

S. Grasso, Y. Sakka, and G. Maizza, Electric current activated/assisted sintering (ECAS): a review of patents, Science and Technology of Advanced Materials, vol.10, p.53001, 1906.

S. H. Risbud and Y. Han, Preface and historical perspective on spark plasma sintering, Scripta Materialia, vol.69, pp.105-106, 2013.

E. A. Olevsky, W. L. Bradbury, C. D. Haines, D. G. Martin, and D. Kapoor, Fundamental Aspects of Spark Plasma Sintering: I. Experimental Analysis of Scalability, Journal of the American Ceramic Society, vol.95, pp.2406-2413, 2012.

O. Guillon, J. Gonzalez-julian, B. Dargatz, T. Kessel, G. Schierning et al., Field-Assisted Sintering Technology/Spark Plasma Sintering: Mechanisms, Materials, and Technology Developments, vol.16, pp.830-849, 2014.

R. Orrù, R. Licheri, A. M. Locci, A. Cincotti, and G. Cao, Consolidation/synthesis of materials by electric current activated/assisted sintering, Materials Science and Engineering: R: Reports, vol.63, pp.127-287, 2009.

M. Nygren and Z. Shen, On the preparation of bio-, nano-and structural ceramics and composites by spark plasma sintering, Solid State Sciences, vol.5, pp.86-95, 2003.

B. Kim, K. Hiraga, K. Morita, and H. Yoshida, Effects of heating rate on microstructure and transparency of spark-plasma-sintered alumina, Journal of the European Ceramic Society, vol.29, pp.323-327, 2009.

Z. Shen, M. Johnsson, Z. Zhao, and M. Nygren, Spark Plasma Sintering of Alumina, vol.85, pp.1921-1927, 2002.

T. Yamamoto, H. Kitaura, Y. Kodera, T. Ishii, M. Ohyanagi et al., Consolidation of Nanostructured ?-SiC by Spark Plasma Sintering, vol.87, pp.1436-1441, 2004.

E. A. Olevsky, S. M. Rolfing, and A. L. Maximenko, Flash (Ultra-Rapid) Spark-Plasma Sintering of Silicon Carbide, Scientific Reports, vol.6, p.33408, 2016.

C. Manière, L. Durand, A. Weibel, and C. Estournès, Spark-plasma-sintering and finite element method: From the identification of the sintering parameters of a submicronic ?alumina powder to the development of complex shapes, Acta Materialia, vol.102, pp.169-175, 2016.

C. Manière, L. Durand, A. Weibel, G. Chevallier, and C. Estournès, A sacrificial material approach for spark plasma sintering of complex shapes, Scripta Materialia, vol.124, pp.126-128, 2016.

D. Giuntini, J. Raethel, M. Herrmann, A. Michaelis, C. D. Haines et al., Spark plasma sintering novel tooling design: temperature uniformization during consolidation of silicon nitride powder, Journal of the Ceramic Society of Japan, vol.124, pp.403-414, 2016.

D. Giuntini, J. Raethel, M. Herrmann, A. Michaelis, and E. A. Olevsky, Advancement of Tooling for Spark Plasma Sintering, vol.98, pp.3529-3537, 2015.

D. Giuntini, E. Olevsky, C. Garcia-cardona, A. Maximenko, M. Yurlova et al., Localized Overheating Phenomena and Optimization of Spark-Plasma Sintering Tooling Design, vol.6, pp.2612-2632, 2013.

M. Suarez, A. Fernandez, J. L. Menendez, R. Torrecillas, H. U. et al.,

T. Kirchner and . Kessel, Challenges and Opportunities for Spark Plasma Sintering: A Key Technology for a New Generation of Materials, Sintering Applications, 2013.

E. A. Olevsky, C. Garcia-cardona, W. L. Bradbury, C. D. Haines, D. G. Martin et al.,

, Kapoor, Fundamental Aspects of Spark Plasma Sintering: II. Finite Element Analysis of Scalability, vol.95, pp.2414-2422, 2012.

K. Vanmeensel, A. Laptev, O. Van-der-biest, and J. Vleugels, Field assisted sintering of electro-conductive ZrO2-based composites, Journal of the European Ceramic Society, vol.27, pp.979-985, 2007.

A. Zavaliangos, J. Zhang, M. Krammer, and J. R. Groza, Temperature evolution during field activated sintering, Materials Science and Engineering: A, vol.379, pp.218-228, 2004.

K. Vanmeensel, . Laptev, . Hennicke, . Vleugels, and . Vanderbiest, Modelling of the temperature distribution during field assisted sintering, Acta Materialia, vol.53, pp.4379-4388, 2005.

C. Maniere, A. Pavia, L. Durand, G. Chevallier, V. Bley et al., Pulse analysis and electric contact measurements in spark plasma sintering, Electric Power Systems Research, vol.127, pp.307-313, 2015.

X. Wei, D. Giuntini, A. L. Maximenko, C. D. Haines, and E. A. Olevsky, Experimental Investigation of Electric Contact Resistance in Spark Plasma Sintering Tooling Setup, vol.98, pp.3553-3560, 2015.

C. Manière, A. Pavia, L. Durand, G. Chevallier, K. Afanga et al., Finiteelement modeling of the electro-thermal contacts in the spark plasma sintering process, European Ceramic Society, vol.9, pp.741-748, 2016.

U. Anselmi-tamburini, S. Gennari, J. E. Garay, and Z. A. Munir, Fundamental investigations on the spark plasma sintering/synthesis process, Materials Science and Engineering: A, vol.394, pp.139-148, 2005.

C. Arnaud, C. Manière, G. Chevallier, C. Estournès, R. Mainguy et al., Dog-bone copper specimens prepared by one-step spark plasma sintering, J Mater Sci, vol.50, pp.7364-7373, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01727547

S. Muñoz and U. Anselmi-tamburini, Temperature and stress fields evolution during spark plasma sintering processes, Journal of Materials Science, vol.45, pp.6528-6539, 2010.

J. B. Allen and C. Walter, Numerical Simulation of the Temperature and Stress Field Evolution Applied to the Field Assisted Sintering Technique, ISRN Materials Science, pp.1-9, 2012.

M. Schwertz, A. Katz, E. Sorrel, S. Lemonnier, E. Barraud et al., Coupled Electro-Thermo-Mechanical Finite Element Modeling of the Spark Plasma Sintering Technique, vol.47, pp.1263-1273, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01344181

S. Skogestad, Simple analytic rules for model reduction and PID controller tuning, Journal of Process Control, vol.13, pp.291-309, 2003.

C. Manière, Spark plasma sintering: coupling between the approaches of modelling instrumentation and materials, 2016.