Powder/die friction in the spark plasma sintering process: Modelling and experimental identification, Scripta Materialia, vol.116, pp.139-142, 2016. ,
Finite element modeling of electric current-activated sintering: The effect of coupled electrical potential, temperature and stress, Acta Materialia, vol.55, issue.10, pp.3611-3622, 2007. ,
Spark-plasma-sintering and finite element method: From the identification of the sintering parameters of a submicronic ?-alumina powder to the development of complex shapes, Acta Materialia, vol.102, pp.169-175, 2016. ,
Moving finite-element mesh model for aiding spark plasma sintering in current control mode of pure ultrafine WC powder, Journal of Materials Science, vol.44, issue.5, pp.1219-1236, 2009. ,
Fundamental investigations on the spark plasma sintering/synthesis process, Materials Science and Engineering: A, vol.394, issue.1-2, pp.139-148, 2005. ,
The effect of electric field and pressure on the synthesis and consolidation of materials: A review of the spark plasma sintering method, Journal of Materials Science, vol.41, issue.3, pp.763-777, 2006. ,
Field?Assisted Sintering Technology/Spark Plasma Sintering: Mechanisms, Materials, and Technology Developments, Advanced Engineering Materials, vol.16, issue.7, pp.830-849, 2014. ,
Finite-element modeling of the electro-thermal contacts in the spark plasma sintering process, Journal of the European Ceramic Society, vol.36, issue.3, pp.741-748, 2016. ,
Dog-bone copper specimens prepared by one-step spark plasma sintering, Journal of Materials Science, vol.50, issue.22, pp.7364-7373, 2015. ,
URL : https://hal.archives-ouvertes.fr/hal-01727547
Proportional integral derivative, modeling and ways of stabilization for the spark plasma sintering process, Results in Physics, vol.7, pp.1494-1497, 2017. ,
Fundamental Aspects of Spark Plasma Sintering: II. Finite Element Analysis of Scalability, Journal of the American Ceramic Society, vol.95, issue.8, pp.2414-2422, 2012. ,
Localized Overheating Phenomena and Optimization of Spark-Plasma Sintering Tooling Design, Materials, vol.6, issue.7, pp.2612-2632, 2013. ,
Coupled Electro-Thermo-Mechanical Finite Element Modeling of the Spark Plasma Sintering Technique, Metallurgical and Materials Transactions B, vol.47, issue.2, pp.1263-1273, 2015. ,
URL : https://hal.archives-ouvertes.fr/hal-01344181
Temperature evolution during field activated sintering, Materials Science and Engineering: A, vol.379, issue.1-2, pp.218-228, 2004. ,
Contact resistances in spark plasma sintering: From in-situ and ex-situ determinations to an extended model for the scale up of the process, Journal of the European Ceramic Society, vol.37, issue.4, pp.1593-1605, 2017. ,
Pulse analysis and electric contact measurements in spark plasma sintering, Electric Power Systems Research, vol.127, pp.307-313, 2015. ,
URL : https://hal.archives-ouvertes.fr/hal-01493438
Experimental Investigation of Electric Contact Resistance in Spark Plasma Sintering Tooling Setup, Journal of the American Ceramic Society, vol.98, issue.11, pp.3553-3560, 2015. ,
Theory of sintering: from discrete to continuum, Materials Science and Engineering: R: Reports, vol.23, issue.2, pp.41-100, 1998. ,
Finite element simulation of hot isostatic pressing of metal powders, International Journal for Numerical Methods in Engineering, vol.25, issue.1, pp.191-212, 1988. ,
A predictive model to reflect the final stage of spark plasma sintering of submicronic ?-alumina, Ceramics International, vol.42, issue.7, pp.9274-9277, 2016. ,
,
Rheological basis of the theory of sintering, 1972. ,
A plasticity theory for porous solids, International Journal of Mechanical Sciences, vol.14, issue.4, pp.215-224, 1972. ,
,
Wilkinson, Christopher John, (born 1 July 1945), Principal (formerly Chairman), Wilkinson Eyre (formerly Chris Wilkinson) Architects Ltd, since 1989; Partner, Wilkinson Design Studios LLP, since 2012, 2007. ,
Pressure sintering by power law creep, Acta Metall, vol.23, pp.1277-1285, 1975. ,
Creep of Power-Law Material Containing Spherical Voids, Journal of Applied Mechanics, vol.59, issue.2S, pp.S88-S95, 1992. ,
Simulation numerique de la mise en forme des ceramiques application a la compaction isostatique a chaud, L'ecole nationale superieure des mines de Paris, 1990. ,
Modeling of conventional hot compaction and Spark Plasma Sintering based on modified micromechanical models of porous materials, Mechanics of Materials, vol.49, pp.72-91, 2012. ,
Constitutive behaviour of metal powder during hot forming. Part I: Experimental investigation with lead powder as a simulation material, Eur. J. Mech. -A/Solids, vol.18, issue.99, pp.102-105, 1999. ,
URL : https://hal.archives-ouvertes.fr/hal-00343099
Constitutive behaviour of metal powder during hot forming., European Journal of Mechanics - A/Solids, vol.18, issue.4, pp.597-615, 1999. ,
URL : https://hal.archives-ouvertes.fr/hal-00343099
Mise en forme de poudre de bore par compression isostatique à chaud: determination des propriétés rhéologiques et simulation numérique du procédé, 1999. ,
Hot pressing and spark plasma sintering of alumina: Discussion about an analytical modelling used for sintering mechanism determination, Scripta Materialia, vol.84-85, pp.35-38, 2014. ,
URL : https://hal.archives-ouvertes.fr/hal-01132508
Spark plasma sintering of a commercially available granulated zirconia powder: I. Sintering path and hypotheses about the mechanism(s) controlling densification, Acta Materialia, vol.55, issue.10, pp.3493-3504, 2007. ,
Spark plasma sintering of alumina: Study of parameters, formal sintering analysis and hypotheses on the mechanism(s) involved in densification and grain growth, Acta Materialia, vol.59, issue.4, pp.1400-1408, 2011. ,
Direct comparison between hot pressing and electric field-assisted sintering of submicron alumina, Acta Materialia, vol.57, issue.18, pp.5454-5465, 2009. ,
Identification of the Norton-Green Compaction Model for the Prediction of the Ti-6Al-4V Densification During the Spark Plasma Sintering Process, Advanced Engineering Materials, vol.18, issue.10, pp.1720-1727, 2016. ,
In-situ creep law determination for modeling Spark Plasma Sintering of TiAl 48-2-2 powder, Intermetallics, vol.86, pp.147-155, 2017. ,
URL : https://hal.archives-ouvertes.fr/hal-01509753
Creep of Polycrystalline Magnesium Aluminate Spinel Studied by an SPS Apparatus, Materials, vol.9, issue.6, p.493, 2016. ,
Densification mechanisms of spark plasma sintering: multi-step pressure dilatometry, Journal of Materials Science, vol.47, issue.20, pp.7036-7046, 2012. ,
Contribution of Electric Current into Densification Kinetics During Spark Plasma Sintering of Conductive Powder, Journal of the American Ceramic Society, vol.98, issue.11, pp.3509-3517, 2015. ,
Spark Plasma Sintering of Commercial Zirconium Carbide Powders: Densification Behavior and Mechanical Properties, Materials, vol.8, issue.9, pp.6043-6061, 2015. ,
Densification mechanism and mechanical properties of tungsten powder consolidated by spark plasma sintering, International Journal of Refractory Metals and Hard Materials, vol.61, pp.22-29, 2016. ,
Preface and historical perspective on spark plasma sintering, Scripta Materialia, vol.69, issue.2, pp.105-106, 2013. ,
Retention of nanostructure in aluminum oxide by very rapid sintering at 1150 °C, Journal of Materials Research, vol.10, issue.2, pp.237-239, 1995. ,
Rapid consolidation processing of silicon nitride powders, Journal of Materials Research, vol.11, issue.2, pp.358-362, 1996. ,
Current understanding and future research directions at the onset of the next century of sintering science and technology, Journal of the American Ceramic Society, vol.100, issue.6, pp.2314-2352, 2017. ,
Fast consolidation of ceramic powders, Materials Science and Engineering: A, vol.204, issue.1-2, pp.146-151, 1995. ,
Theory of nonlinearly viscous and plastic behavior of porous materials, Soviet Powder Metallurgy and Metal Ceramics, vol.26, issue.8, pp.621-626, 1987. ,
Thermal-electrical-mechanical simulation of the nickel densification by Spark Plasma Sintering. Comparison with experiments, Mechanics of Materials, vol.100, pp.126-147, 2016. ,
Steady-state creep of pure polycrystalline nickel from 0.3 to 0.55 Tm, Acta Metall, vol.18, pp.90102-90103, 1970. ,