R. M. German, Sintering Practice, Sintering: from Empirical Observations to Scientific Principles, pp.471-512, 2014.

A. G. Thomas and H. J. Jones, HOT PRESSING OF CERAMIC POWDERS, Powder Metallurgy, vol.3, issue.6, pp.160-169, 1960.

O. Guillon, J. Gonzalez?julian, B. Dargatz, T. Kessel, G. Schierning et al., Field?Assisted Sintering Technology/Spark Plasma Sintering: Mechanisms, Materials, and Technology Developments, Advanced Engineering Materials, vol.16, issue.7, pp.830-849, 2014.

J. P. Kelly and O. A. Graeve, Spark Plasma Sintering as an Approach to Manufacture Bulk Materials: Feasibility and Cost Savings, JOM, vol.67, issue.1, pp.29-33, 2014.

R. Wroe and A. T. Rowley, Evidence for a non-thermal microwave effect in the sintering of partially stabilized zirconia, Journal of Materials Science, vol.31, issue.8, pp.2019-2026, 1996.

K. H. Brosnan, G. L. Messing, and D. K. Agrawal, Microwave Sintering of Alumina at 2.45 GHz, Journal of the American Ceramic Society, vol.86, issue.8, pp.1307-1312, 2003.

S. Charmond, C. P. Carry, and D. Bouvard, Densification and microstructure evolution of Y-Tetragonal Zirconia Polycrystal powder during direct and hybrid microwave sintering in a single-mode cavity, Journal of the European Ceramic Society, vol.30, issue.6, pp.1211-1221, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00528038

K. I. Rybakov, E. A. Olevsky, and E. V. Krikun, Microwave Sintering: Fundamentals and Modeling, Journal of the American Ceramic Society, vol.96, issue.4, pp.1003-1020, 2013.

S. Grasso, Y. Sakka, and G. Maizza, Electric current activated/assisted sintering (ECAS): a review of patents 1906?2008, Science and Technology of Advanced Materials, vol.10, issue.5, p.053001, 2009.

G. Lee, M. S. Yurlova, D. Giuntini, E. G. Grigoryev, O. L. Khasanov et al., Densification of zirconium nitride by spark plasma sintering and high voltage electric discharge consolidation: A comparative analysis, Ceramics International, vol.41, issue.10, pp.14973-14987, 2015.

Z. A. Munir, U. Anselmi-tamburini, and M. Ohyanagi, The effect of electric field and pressure on the synthesis and consolidation of materials: A review of the spark plasma sintering method, Journal of Materials Science, vol.41, issue.3, pp.763-777, 2006.

R. Orrù, R. Licheri, A. M. Locci, A. Cincotti, and G. Cao, Consolidation/synthesis of materials by electric current activated/assisted sintering, Materials Science and Engineering: R: Reports, vol.63, issue.4-6, pp.127-287, 2009.

S. H. Risbud and Y. Han, Preface and historical perspective on spark plasma sintering, Scripta Materialia, vol.69, issue.2, pp.105-106, 2013.

R. Orrù and G. Cao, Comparison of Reactive and Non-Reactive Spark Plasma Sintering Routes for the Fabrication of Monolithic and Composite Ultra High Temperature Ceramics (UHTC) Materials, Materials, vol.6, issue.5, pp.1566-1583, 2013.

J. P. Kelly and O. A. Graeve, Mechanisms of pore formation in high-temperature carbides: Case study of TaC prepared by spark plasma sintering, Acta Materialia, vol.84, pp.472-483, 2015.

S. Guo, Densification of ZrB2-based composites and their mechanical and physical properties: A review, Journal of the European Ceramic Society, vol.29, issue.6, pp.995-1011, 2009.

M. Suarez, A. Fernandez, J. L. Menendez, R. Torrecillas, H. U. et al., Challenges and Opportunities for Spark Plasma Sintering: A Key Technology for a New Generation of Materials, Sintering Applications, pp.319-342, 2013.

R. Raj, M. Cologna, A. L. Prette, and V. Sglavo, Methods of flash sintering, 2013.

M. Cologna, B. Rashkova, and R. Raj, Flash Sintering of Nanograin Zirconia in <5 s at 850°C, Journal of the American Ceramic Society, vol.93, issue.11, pp.3556-3559, 2010.

Y. Dong and I. ?. Chen, Thermal Runaway in Mold?Assisted Flash Sintering, Journal of the American Ceramic Society, vol.99, issue.9, pp.2889-2894, 2016.

Y. Du, A. J. Stevenson, D. Vernat, M. Diaz, and D. Marinha, Estimating Joule heating and ionic conductivity during flash sintering of 8YSZ, Journal of the European Ceramic Society, vol.36, issue.3, pp.749-759, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01308061

S. Grasso, Y. Sakka, N. Rendtorff, C. Hu, G. Maizza et al., Modeling of the temperature distribution of flash sintered zirconia, Journal of the Ceramic Society of Japan, vol.119, issue.1386, pp.144-146, 2011.

E. Zapata-solvas, S. Bonilla, P. R. Wilshaw, and R. I. Todd, Preliminary investigation of flash sintering of SiC, Journal of the European Ceramic Society, vol.33, issue.13-14, pp.2811-2816, 2013.

R. I. Todd, E. Zapata-solvas, R. S. Bonilla, T. Sneddon, and P. R. Wilshaw, Electrical characteristics of flash sintering: thermal runaway of Joule heating, Journal of the European Ceramic Society, vol.35, issue.6, pp.1865-1877, 2015.

O. Yamamoto, Electrical conductivity of stabilized zirconia with ytterbia and scandia, Solid State Ionics, vol.79, pp.137-142, 1995.

J. H. Racette, Intrinsic Electrical Conductivity in Silicon Carbide, Physical Review, vol.107, issue.6, pp.1542-1544, 1957.

A. L. Prette, M. Cologna, V. Sglavo, and R. Raj, Flash-sintering of Co2MnO4 spinel for solid oxide fuel cell applications, Journal of Power Sources, vol.196, issue.4, pp.2061-2065, 2011.

A. Rousset, C. Tenailleau, P. Dufour, H. Bordeneuve, I. Pasquet et al., Electrical Properties of Mn3?xCoxO4(0 ? x ? 3) Ceramics: An Interesting System for Negative Temperature Coefficient Thermistors, International Journal of Applied Ceramic Technology, vol.10, issue.1, pp.175-185, 2012.

M. Cologna, J. S. Francis, and R. Raj, Field assisted and flash sintering of alumina and its relationship to conductivity and MgO-doping, Journal of the European Ceramic Society, vol.31, issue.15, pp.2827-2837, 2011.

M. Biesuz and V. M. Sglavo, Flash sintering of alumina: Effect of different operating conditions on densification, Journal of the European Ceramic Society, vol.36, issue.10, pp.2535-2542, 2016.

R. Muccillo, E. N. Muccillo, and M. Kleitz, Densification and enhancement of the grain boundary conductivity of gadolinium-doped barium cerate by ultra fast flash grain welding, Journal of the European Ceramic Society, vol.32, issue.10, pp.2311-2316, 2012.

C. Mclaren, W. Heffner, R. Tessarollo, R. Raj, and H. Jain, Electric field-induced softening of alkali silicate glasses, Applied Physics Letters, vol.107, issue.18, p.184101, 2015.

M. Biesuz, P. Luchi, A. Quaranta, A. Martucci, and V. M. Sglavo, Photoemission during flash sintering: An interpretation based on thermal radiation, Journal of the European Ceramic Society, vol.37, issue.9, pp.3125-3130, 2017.

Y. Zhang, J. Jung, and J. Luo, Thermal runaway, flash sintering and asymmetrical microstructural development of ZnO and ZnO?Bi2O3 under direct currents, Acta Materialia, vol.94, pp.87-100, 2015.

E. A. Olevsky, S. Kandukuri, and L. Froyen, Consolidation enhancement in spark-plasma sintering: Impact of high heating rates, Journal of Applied Physics, vol.102, issue.11, p.114913, 2007.

W. Ji, B. Parker, S. Falco, J. Y. Zhang, Z. Y. Fu et al., Ultra-fast firing: Effect of heating rate on sintering of 3YSZ, with and without an electric field, Journal of the European Ceramic Society, vol.37, issue.6, pp.2547-2551, 2017.

Y. Bykov, S. Egorov, A. Eremeev, V. Kholoptsev, I. Plotnikov et al., On the Mechanism of Microwave Flash Sintering of Ceramics, Materials, vol.9, issue.8, p.684, 2016.

R. Chaim, Liquid Film Capillary Mechanism for Densification of Ceramic Powders during Flash Sintering, Materials, vol.9, issue.4, p.280, 2016.

R. Chaim, Particle Surface Softening as Universal Behaviour during Flash Sintering of Oxide Nano-Powders, Materials, vol.10, issue.2, p.179, 2017.

K. S. Naik, V. M. Sglavo, and R. Raj, Flash sintering as a nucleation phenomenon and a model thereof, Journal of the European Ceramic Society, vol.34, issue.15, pp.4063-4067, 2014.

J. S. Francis, M. Cologna, D. Montinaro, and R. Raj, Flash Sintering of Anode-Electrolyte Multilayers for SOFC Applications, Journal of the American Ceramic Society, vol.96, issue.5, pp.1352-1354, 2013.

R. Raj, M. Cologna, and J. S. Francis, Influence of Externally Imposed and Internally Generated Electrical Fields on Grain Growth, Diffusional Creep, Sintering and Related Phenomena in Ceramics, Journal of the American Ceramic Society, vol.94, issue.7, pp.1941-1965, 2011.

M. Biesuz, P. Luchi, A. Quaranta, and V. M. Sglavo, Theoretical and phenomenological analogies between flash sintering and dielectric breakdown in ?-alumina, Journal of Applied Physics, vol.120, issue.14, p.145107, 2016.

C. Manière, T. Zahrah, and E. A. Olevsky, Inherent heating instability of direct microwave sintering process: Sample analysis for porous 3Y-ZrO2, Scripta Materialia, vol.128, pp.49-52, 2017.

C. Manière, T. Zahrah, and E. A. Olevsky, Fully coupled electromagnetic-thermal-mechanical comparative simulation of direct vs hybrid microwave sintering of 3Y-ZrO2, Journal of the American Ceramic Society, vol.100, issue.6, pp.2439-2450, 2017.

T. Saunders, S. Grasso, and M. J. Reece, Ultrafast-Contactless Flash Sintering using Plasma Electrodes, Scientific Reports, vol.6, issue.1, p.27222, 2016.

O. Vasylkiv, H. Borodianska, Y. Sakka, and D. Demirskyi, Flash spark plasma sintering of ultrafine yttria-stabilized zirconia ceramics, Scripta Materialia, vol.121, pp.32-36, 2016.

S. Grasso, T. Saunders, H. Porwal, B. Milsom, A. Tudball et al., Flash Spark Plasma Sintering (FSPS) of ? and ? SiC, Journal of the American Ceramic Society, vol.99, issue.5, pp.1534-1543, 2016.

S. Grasso, T. Saunders, H. Porwal, O. Cedillos-barraza, D. D. Jayaseelan et al., Flash Spark Plasma Sintering (FSPS) of Pure ZrB2, Journal of the American Ceramic Society, vol.97, issue.8, pp.2405-2408, 2014.

R. Mckinnon, S. Grasso, A. Tudball, and M. J. Reece, Flash spark plasma sintering of cold-Pressed TiB 2 - h BN, Journal of the European Ceramic Society, vol.37, issue.8, pp.2787-2794, 2017.

E. A. Olevsky, S. M. Rolfing, and A. L. Maximenko, Flash (Ultra-Rapid) Spark-Plasma Sintering of Silicon Carbide, Scientific Reports, vol.6, issue.1, p.33408, 2016.

W. Qin, H. Majidi, J. Yun, and K. Van-benthem, Electrode Effects on Microstructure Formation During FLASH Sintering of Yttrium-Stabilized Zirconia, Journal of the American Ceramic Society, vol.99, issue.7, pp.2253-2259, 2016.

M. C. Steil, D. Marinha, Y. Aman, J. R. Gomes, and M. Kleitz, From conventional ac flash-sintering of YSZ to hyper-flash and double flash, Journal of the European Ceramic Society, vol.33, issue.11, pp.2093-2101, 2013.

M. Yu, S. Grasso, R. Mckinnon, T. Saunders, and M. J. Reece, Review of flash sintering: materials, mechanisms and modelling, Advances in Applied Ceramics, vol.116, issue.1, pp.24-60, 2016.

G. Weintraub and H. Rush, Process and apparatus for sintering refractory materials, 1913.

E. Zapata-solvas, D. Gómez-garcía, A. Domínguez-rodríguez, and R. I. Todd, Ultra-fast and energy-efficient sintering of ceramics by electric current concentration, Scientific Reports, vol.5, issue.1, p.8513, 2015.

B. Román-manso, M. Belmonte, M. I. Osendi, and P. Miranzo, Effects of Current Confinement on the Spark Plasma Sintering of Silicon Carbide Ceramics, Journal of the American Ceramic Society, vol.98, issue.9, pp.2745-2753, 2015.

W. Qin, J. Yun, A. M. Thron, and K. Van-benthem, Temperature gradient and microstructure evolution in AC flash sintering of 3 mol% yttria-stabilized zirconia, Materials and Manufacturing Processes, vol.32, issue.5, pp.549-556, 2016.

. Mater and . Manuf, Masthead: (Adv. Mater. 32/2017), Advanced Materials, vol.29, issue.32, pp.1-8, 2017.

C. Manière, G. Lee, and E. A. Olevsky, Proportional integral derivative, modeling and ways of stabilization for the spark plasma sintering process, Results in Physics, vol.7, pp.1494-1497, 2017.

A. Zavaliangos, J. Zhang, M. Krammer, and J. R. Groza, Temperature evolution during field activated sintering, Materials Science and Engineering: A, vol.379, issue.1-2, pp.218-228, 2004.

K. Vanmeensel, A. Laptev, J. Hennicke, J. Vleugels, and O. Vanderbiest, Modelling of the temperature distribution during field assisted sintering, Acta Materialia, vol.53, issue.16, pp.4379-4388, 2005.

A. Cincotti, A. M. Locci, R. Orrù, and G. Cao, Modeling of SPS apparatus: Temperature, current and strain distribution with no powders, AIChE Journal, vol.53, issue.3, pp.703-719, 2007.

X. Wei, D. Giuntini, A. L. Maximenko, C. D. Haines, and E. A. Olevsky, Experimental Investigation of Electric Contact Resistance in Spark Plasma Sintering Tooling Setup, Journal of the American Ceramic Society, vol.98, issue.11, pp.3553-3560, 2015.

, J. Am. Ceram. Soc, vol.98, issue.1, pp.3553-3560, 2015.

C. Arnaud, C. Manière, G. Chevallier, C. Estournès, R. Mainguy et al., Dog-bone copper specimens prepared by one-step spark plasma sintering, Journal of Materials Science, vol.50, issue.22, pp.7364-7373, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01727547

C. Maniere, A. Pavia, L. Durand, G. Chevallier, V. Bley et al., Pulse analysis and electric contact measurements in spark plasma sintering, Electric Power Systems Research, vol.127, pp.307-313, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01493438

C. Manière, A. Pavia, L. Durand, G. Chevallier, K. Afanga et al., Finite-element modeling of the electro-thermal contacts in the spark plasma sintering process, Journal of the European Ceramic Society, vol.36, issue.3, pp.741-748, 2016.

C. Manière, L. Durand, E. Brisson, H. Desplats, P. Carré et al., Contact resistances in spark plasma sintering: From in-situ and ex-situ determinations to an extended model for the scale up of the process, Journal of the European Ceramic Society, vol.37, issue.4, pp.1593-1605, 2017.