K. I. Rybakov, E. A. Olevsky, and E. V. Krikun, Microwave Sintering: Fundamentals and Modeling, Journal of the American Ceramic Society, vol.96, issue.4, pp.1003-1020, 2013.

M. Oghbaei and O. Mirzaee, ChemInform Abstract: Microwave versus Conventional Sintering: A Review of Fundamentals, Advantages and Applications, ChemInform, vol.41, issue.21, pp.no-no, 2010.

S. Marinel, E. Savary, and M. Gomina, Sintering of CuO and ZnO in a Single Mode Microwave Cavity with Shrinkage Control, Journal of Microwave Power and Electromagnetic Energy, vol.44, issue.1, pp.57-63, 2010.
URL : https://hal.archives-ouvertes.fr/hal-02453556

R. Roy, D. Agrawal, J. Cheng, and S. Gedevanishvili, Full sintering of powdered-metal bodies in a microwave field, Nature, vol.399, issue.6737, pp.668-670, 1999.

S. Charmond, C. P. Carry, and D. Bouvard, Densification and microstructure evolution of Y-Tetragonal Zirconia Polycrystal powder during direct and hybrid microwave sintering in a single-mode cavity, Journal of the European Ceramic Society, vol.30, issue.6, pp.1211-1221, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00528038

U. Chung, C. Elissalde, F. Mompiou, J. Majimel, S. Gomez et al., Interface Investigation in Nanostructured BaTiO3/Silica Composite Ceramics, Journal of the American Ceramic Society, vol.93, issue.3, pp.865-874, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00467044

K. Yan, F. Wang, D. Wu, X. Ren, and K. Zhu, Ferroelectric aging effects and large recoverable electrostrain in ceria?doped BaTiO 3 ceramics, Journal of the American Ceramic Society, 2018.

, , vol.93, pp.865-74

F. Zuo, C. Carry, S. Saunier, S. Marinel, and D. Goeuriot, Comparison of the Microwave and Conventional Sintering of Alumina: Effect of MgO Doping and Particle Size, Journal of the American Ceramic Society, vol.96, issue.6, pp.1732-1737, 2013.
URL : https://hal.archives-ouvertes.fr/hal-02922053

R. Heuguet, S. Marinel, A. Thuault, and A. Badev, Effects of the Susceptor Dielectric Properties on the Microwave Sintering of Alumina, Journal of the American Ceramic Society, vol.96, issue.12, pp.3728-3736, 2013.
URL : https://hal.archives-ouvertes.fr/hal-02450336

Y. Bykov, S. Egorov, A. Eremeev, V. Kholoptsev, I. Plotnikov et al., On the Mechanism of Microwave Flash Sintering of Ceramics, Materials, vol.9, issue.8, p.684, 2016.

Y. V. Bykov, S. V. Egorov, A. G. Eremeev, V. V. Kholoptsev, K. I. Rybakov et al., Flash Microwave Sintering of Transparent Yb:(LaY)2 O3 Ceramics, Journal of the American Ceramic Society, vol.98, issue.11, pp.3518-3524, 2015.

C. Manière, G. Lee, T. Zahrah, and E. A. Olevsky, Microwave flash sintering of metal powders: From experimental evidence to multiphysics simulation, Acta Materialia, vol.147, pp.24-34, 2018.

J. Perelaer, M. Klokkenburg, C. E. Hendriks, and U. S. Schubert, Microwave Flash Sintering of Inkjet-Printed Silver Tracks on Polymer Substrates, Advanced Materials, vol.21, issue.47, pp.4830-4834, 2009.

J. Croquesel, D. Bouvard, J. Chaix, C. P. Carry, and S. Saunier, Development of an instrumented and automated single mode cavity for ceramic microwave sintering: Application to an alpha pure alumina powder, Materials & Design, vol.88, pp.98-105, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01263552

C. Manière, T. Zahrah, and E. A. Olevsky, Inherent heating instability of direct microwave sintering process: Sample analysis for porous 3Y-ZrO2, Scripta Materialia, vol.128, pp.49-52, 2017.

C. Manière, T. Zahrah, and E. A. Olevsky, Fully coupled electromagnetic-thermal-mechanical comparative simulation of direct vs hybrid microwave sintering of 3Y-ZrO2, Journal of the American Ceramic Society, vol.100, issue.6, pp.2439-2450, 2017.

E. A. Olevsky, Theory of sintering: from discrete to continuum, Materials Science and Engineering: R: Reports, vol.23, issue.2, pp.41-100, 1998.

E. A. Olevsky, C. Garcia-cardona, W. L. Bradbury, C. D. Haines, D. G. Martin et al., Fundamental Aspects of Spark Plasma Sintering: II. Finite Element Analysis of Scalability, Journal of the American Ceramic Society, vol.95, issue.8, pp.2414-2422, 2012.

. Scalability and . Kang-s-j, J Am Ceram Soc, vol.95, issue.8, pp.2414-2436, 2012.

R. K. Bordia, S. Kang, and E. A. Olevsky, Current understanding and future research directions at the onset of the next century of sintering science and technology, Journal of the American Ceramic Society, vol.100, issue.6, pp.2314-2352, 2017.

C. Manière and E. A. Olevsky, Porosity dependence of powder compaction constitutive parameters: Determination based on spark plasma sintering tests, Scripta Materialia, vol.141, pp.62-66, 2017.

C. Manière, U. Kus, L. Durand, R. Mainguy, J. Huez et al., Identification of the Norton-Green Compaction Model for the Prediction of the Ti-6Al-4V Densification During the Spark Plasma Sintering Process, Advanced Engineering Materials, vol.18, issue.10, pp.1720-1727, 2016.

D. Martins, F. Grumbach, C. Manière, P. Sallot, K. Mocellin et al., In-situ creep law determination for modeling Spark Plasma Sintering of TiAl 48-2-2 powder, Intermetallics, vol.86, pp.147-155, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01509753

V. Skorohod, Rheological basis of the theory of sintering, Nauk Dumka, Kiev, 1972.

C. Manière, T. Zahrah, and E. A. Olevsky, Fluid dynamics thermo-mechanical simulation of sintering: Uniformity of temperature and density distributions, Applied Thermal Engineering, vol.123, pp.603-613, 2017.

R. Wroe and A. T. Rowley, Evidence for a non-thermal microwave effect in the sintering of partially stabilized zirconia, Journal of Materials Science, vol.31, issue.8, pp.2019-2026, 1996.

K. I. Rybakov, E. A. Olevsky, and V. E. Semenov, The microwave ponderomotive effect on ceramic sintering, Scripta Materialia, vol.66, issue.12, pp.1049-1052, 2012.

E. A. Olevsky, A. L. Maximenko, and E. G. Grigoryev, Ponderomotive effects during contact formation in microwave sintering, Modelling and Simulation in Materials Science and Engineering, vol.21, issue.5, p.055022, 2013.

, 10.1029/00EO00165, CrossRef Listing of Deleted DOIs, vol.81, issue.21, p.1, 2011.