W. M. Thomas, P. L. Threadgill, and E. D. Nicholas, Feasibility of friction stir welding steel, Sci. Technol. Weld. Join, vol.4, pp.365-372, 1999.

W. M. Thomas and E. D. Nicholas, Friction stir welding for the transportation industries, Mater. Des, vol.18, pp.269-273, 1997.

H. C. Dey, M. Ashfaq, A. K. Bhaduri, and K. P. Rao, Joining of titanium to 304l stainless steel by friction welding, J. Mater. Process. Technol, vol.209, pp.5862-5870, 2009.

H. Kasai, Y. Morisada, and H. Fujii, Dissimilar fsw of immiscible materials: Steel/magnesium, Mater. Sci. Eng. A, vol.624, pp.250-255, 2015.

Y. Chen, C. Liu, and G. Liu, Study on the joining of titanium and aluminum dissimilar alloys by friction stir welding, Open Mater. Sci. J, vol.5, pp.256-261, 2011.

P. Pourahmad and M. Abbasi, Materials flow and phase transformation in friction stir welding of al 6013/mg, Trans. Nonferrous Met. Soc. China, vol.23, pp.1253-1261, 2013.

P. Xue, B. L. Xiao, D. R. Ni, and Z. Y. Ma, Enhanced mechanical properties of friction stir welded dissimilar Al-Cu joint by intermetallic compounds, Mater. Sci. Eng. A, vol.527, pp.5723-5727, 2010.

R. D. Rai, H. K. Bhadeshia, and T. Debroy, Friction stir welding tools, Sci. Technol. Weld. Join, vol.16, pp.325-342, 2011.

D. Li, X. Yang, L. Cui, F. He, and X. Zhang, Investigation of stationary shoulder friction stir welding of aluminum alloy 7075-t651, J. Mater. Process. Technol, vol.219, pp.112-123, 2015.

R. S. Mishra and Z. Y. Ma, Friction stir welding and processing, Mater. Sci. Eng. R, vol.50, pp.1-78, 2005.

Y. C. Lin and J. N. Chen, Influence of process parameters on friction stir spot welded aluminum joints by various threaded tools, J. Mater. Process. Technol, vol.225, pp.347-356, 2015.

H. K. Mohanty, D. Venkateswarlu, M. M. Mahapatra, P. Kumar, and N. R. Mandal, Modeling the effects of tool probe geometries and process parameters on friction stirred aluminium welds, J. Mech. Eng. Autom, vol.2, pp.74-79, 2012.

A. P. Reynolds, Visualisation of material flow in autogenous friction stir welds, Sci. Technol. Weld. Join, vol.5, pp.120-124, 2000.

J. Zapata, M. Toro, and D. Lopez, Residual stresses in friction stir dissimilar welding of aluminum alloys, J. Mater. Process. Technol, vol.229, pp.121-127, 2016.

H. Bisadi, M. Tour, and A. Tavakoli, The influence of process parameters on microstructure and mechanical properties of friction stir welded al 5083 alloy lap joint, Am. J. Mater. Sci, vol.1, pp.93-97, 2011.

E. Hug and N. Bellido, Brittleness study of intermetallic (Cu,Al) layers in copper clad aluminium thin wires, Mater. Sci. Eng. A, pp.7103-7106, 2011.

K. Kimapong and T. Watanabe, Effect of welding process parameters on mechanical property of fsw lap joint between aluminum alloy and steel, Mater. Trans, vol.46, pp.2211-2217, 2005.

S. Lan, X. Liu, and J. Ni, Microstructural evolution during friction stir welding of dissimilar aluminum alloy to advanced high-strength steel, Int. J. Adv. Manuf. Technol, vol.82, pp.2183-2193, 2016.

A. Yazdipour and A. Heidarzadeh, Effect of friction stir welding on microstructure and mechanical properties of dissimilar al 5083-h321 and 316l stainless steel alloys joints, J. Alloys Compd, vol.680, pp.595-603, 2016.

A. Yazdipour and A. Heidarzadeh, Dissimilar butt friction stir welding of al 5083-h321 and 316l stainless steel alloys, Int. J. Adv. Manuf. Technol, vol.87, pp.3105-3112, 2016.

T. Chen, Process parameters study on fsw joint of dissimilar metals for aluminum-steel, J. Mater. Sci, vol.44, pp.2573-2580, 2009.

A. Elrefaey, M. Gouda, M. Takahashi, and K. Ikeuchi, Characterization of aluminum/steel lap joint by friction stir welding, J. Mater. Eng. Perform, vol.14, pp.10-17, 2005.

T. Nishida, T. Ogura, H. Nishida, M. Fujimoto, M. Takahashi et al., Formation of interfacial microstructure in a friction stir welded lap joint between aluminium alloy and stainless steel, Sci. Technol. Weld. Join, vol.19, pp.609-616, 2014.

K. Kimapong and T. Watanabe, Friction stir welding of aluminum alloy to steel, Weld. J, vol.83, pp.277-282, 2004.

P. L. Threadgill, A. J. Leonard, H. R. Shercliff, and P. J. Withers, Friction stir welding of aluminium alloys, Int. Mater. Rev, vol.54, pp.49-93, 2009.

G. Çam, Friction stir welded structural materials: Beyond al-alloys, Int. Mater. Rev, vol.56, pp.1-48, 2011.

L. De-filippis, L. Serio, D. Palumbo, R. De-finis, and U. Galietti, Optimization and characterization of the friction stir welded sheets of aa 5754-h111: Monitoring of the quality of joints with thermographic techniques, Materials, vol.10, 1165.

G. G. Roy, R. Nandan, and T. Debroy, Dimensionless correlation to estimate peak temperature during friction stir welding, Sci. Technol. Weld. Join, vol.11, pp.606-608, 2006.

P. T. Summers, Y. Chen, C. M. Rippe, B. Allen, A. P. Mouritz et al., Overview of aluminum alloy mechanical properties during and after fires, Fire Sci. Rev, vol.4, pp.1-36, 2015.

K. Liu, X. P. Li, M. Rahman, and X. D. Liu, Cbn tool wear in ductile cutting of tungsten carbide, Wear, vol.255, pp.1344-1351, 2003.

H. Liu, Y. Hu, Y. Peng, C. Dou, and Z. Wang, The effect of interface defect on mechanical properties and its formation mechanism in friction stir lap welded joints of aluminum alloys, J. Mater. Process. Technol, vol.238, pp.244-254, 2016.

N. Masahashi, S. Watanabe, N. Nomura, S. Semboshi, and S. Hanada, Laminates based on an iron aluminide intermetallic alloy and a crmo steel, Intermetallics, vol.13, pp.717-726, 2005.

M. Watanabe, K. Feng, Y. Nakamura, and S. Kumai, Growth manner of intermetallic compound layer produced at welding interface of friction stir spot welded aluminum/steel lap joint, Mater. Trans, vol.52, pp.953-959, 2011.

T. B. Massalski and H. Okamoto, Binary Alloy Phase Diagrams, 1990.

M. Girard, B. Huneau, C. Genevois, X. Sauvage, and G. Racineux, Friction stir diffusion bonding of dissimilar metals, Sci. Technol. Weld. Join, vol.15, pp.661-665, 2010.
URL : https://hal.archives-ouvertes.fr/hal-01008236

M. Movahedi, A. H. Kokabi, S. M. Reihani, H. Najafi, S. A. Farzadfar et al., Growth kinetics of Al-Fe intermetallic compounds during annealing treatment of friction stir lap welds, Mater. Charact, vol.90, pp.121-126, 2014.

F. Picot, A. Gueydan, and E. Hug, Influence of friction stir welding parameters on titanium-aluminum heterogeneous lap joining configuration, AIP Conf. Proc. 2017, 1896, p.50008

A. Gueydan and B. Domengès, Hug, E. Study of the intermetallic growth in copper-clad aluminum wires after thermal aging, Intermetallics, vol.50, pp.34-42, 2014.

G. Kidson, Some aspects of the growth of diffusion layers in binary systems, J. Nucl. Mater, vol.3, pp.21-29, 1961.