M. Favaloro, Properties and processes of linear PPS for continuous fiber composites aerospace applications, Proceedings of SAE Aerotech Conference, 2009.

B. Vieille, W. Albouy, L. Chevalier, and L. Taleb, About the influence of stamping on thermoplastic-based composites for aeronautical applications, Compos Part B, vol.45, pp.821-855, 2013.

B. Vieille, J. Aucher, and L. Taleb, Woven ply thermoplastic laminates under severe conditions: notched laminates and bolted joints, Compos Part B, vol.42, pp.341-350, 2011.
URL : https://hal.archives-ouvertes.fr/hal-02133226

D. Blond, B. Vieille, M. Gomina, and L. Taleb, Influence of stamping on microstructural and mechanical behavior of woven ply PPS-based laminates under severe conditions, J Reinf Plast Compos, vol.33, issue.17, pp.1656-68, 2014.

B. Vieille, W. Albouy, and L. Taleb, Investigations on stamping of C/PEEK laminates: influence on meso-structure and macroscopic mechanical properties under severe conditions, Compos Part B, vol.63, pp.101-111, 2014.
URL : https://hal.archives-ouvertes.fr/hal-02132997

B. Vieille, J. Aucher, and L. Taleb, Comparative study on the behavior of woven-ply reinforced thermoplastic or thermosetting laminates under severe environmental conditions, Mater Des, vol.35, pp.707-726, 2012.
URL : https://hal.archives-ouvertes.fr/hal-02133014

L. V. Smith, B. D. Campbell, and K. Peterson, A comparative study of the environmental durability of thermoplastic composites, Proceedings of 33rd International SAMPE Technical Conference, 2001.

G. Gohorianu, Interaction entre les d efauts d'usinage et la tenue en matage d'assemblages boulonn es en carbone/ epoxy

T. University, , 2008.

J. Ekh, Multi-fastener single-lap joints in composite structures. PhD thesis of the Royal Institute of Technology, 2006.

R. Walsh, M. Vedula, and J. Koczak, A comparative assessment of bolted joints in a graphite reinforced thermoset vs. thermoplastic, SAMPE Q, vol.20, issue.4, pp.15-24, 1989.

W. A. Hufenbach, F. Adam, R. Kupfer, M. Dannemann, and M. Pohl, Proceedings of the 16th Int Conference on Composite Structures, vol.16, pp.28-30, 2011.

, Test standard EN 2850: aerospace series e Fiber-reinforced plastics e test

, Test standard EN 6037: aerospace series e Fiber-reinforced plastics e test method e determination of bearing strength

G. L. Farley and R. M. Jones, Crushing characteristics of continuous fiber-reinforced composite tubes, J Compos Mater, vol.26, issue.1, pp.37-50, 1992.

D. Hull, A unified approach to progressive crushing of fibre-reinforced composite tubes, Compos Sci Technol, vol.40, pp.377-421, 1991.

, Influence of stamping on single-lap bolted joints behavior of quasi-isotropic C/PEEK laminates under severe conditions: observation of fracture surfaces

J. A. Grape and V. Gupta, The effect of temperature on the strength and failure mechanisms of a woven carbon/polyimide laminate under compression, Mech Mater, vol.30, issue.3, pp.165-80, 1998.

X. Diao, L. Ye, and Y. Mai, Fatigue behaviour of CF/PEEK composite laminates made from commingled prepreg, Compos Part A, vol.28, issue.8, pp.739-786, 1997.

T. Osada, A. Nakai, and H. Hamada, Initial fracture behavior of satin woven fabric composites, Compos Struct, vol.61, issue.4, pp.333-342, 2003.

E. K. Gamstedt and L. A. Berglund, Fatigue in composites: science and technology of the fatigue response of fibre-reinforced plastics, 2003.

M. Kawai and N. Honda, Off-axis fatigue behavior of a carbon/epoxy cross-ply laminate and predictions considering inelasticity and in situ strength of embedded plies, Int J Fatigue, vol.30, issue.10, pp.1743-55, 2008.

A. S. Argon, Fracture of composites, vol.1, p.106, 1972.

S. Kyriakid-es and A. E. Ruff, Aspects of the failure and postfailure of fiber composites in compression, J Compos Mater, vol.31, issue.20, 1997.

T. J. Vogler and S. Kyriakid, On the initiation and growth of kink bands in fiber composites: part I. Experiments, Int J Solid Struct, vol.38, pp.2639-51, 2001.

V. P. Lawlor, W. F. Stanley, and M. A. Mccarthy, Characterisation of damage development in single shear bolted composite joints, Plast Rubber Compos, vol.31, issue.3, pp.126-159, 2002.

F. Ascione, L. Feo, and F. Maceri, On the pin-bearing failure load of GFRP bolted laminates: an experimental analysis on the influence of bolt diameter, Compos Part B, vol.41, pp.482-90, 2010.

S. D. Thoppul, J. Finegan, and R. F. Gibson, Mechanics of mechanically fastened joints in polymerematrix composite structures e a review, Compos Sci Tech, vol.69, pp.301-330, 2009.

H. Park, Effects of stacking sequence and clamping force on the bearing strengths of mechanically fastened joints in composite laminates, Compos Struct, vol.53, pp.213-234, 2001.

B. K. Parida, R. V. Prakash, P. D. Mangalgiri, and K. Vijayaraju, Influence of environmental and geometric parameters on the behavior of fastener joints in advanced composites, Compos Mater Fatigue Fract ASTM STP, vol.1285, pp.432-51, 1997.

L. Feo, G. Marra, and A. S. Mosallam, Stress analysis of multi-bolted joints for FRP pultruded composite structures, Compos Struct, vol.94, pp.3769-80, 2012.

F. Ascione, L. Feo, and F. Maceri, An experimental investigation on the bearing failure load of glass fibre/epoxy laminates, Compos Part B, vol.40, issue.3, pp.197-205, 2009.

G. Gohorianu, Interaction entre les d efauts d'usinage et la tenue en matage d'assemblages boulonn es en carbone/ epoxy. PhD thesis n 3248 of the University Paul Sabatier, 2008.

P. Camanho, S. Hallett, and . In, Composite joints and connections: principles, modelling and testing, pp.20-21, 2011.