A. Vallet and R. Borghi, Modélisation eulerienne de l'atomisation d'un jet liquide, Comptes Rendus de l'Académie des Sciences-Series IIB-MechanicsPhysics-Astronomy, vol.327, issue.10, pp.1015-1020, 1999.

A. Vallet, A. Burluka, and R. Borghi, Development of a eulerian model for the atomization of a liquid jet, Atomization and Sprays, vol.11, issue.6, pp.619-905, 2001.

H. G. Weller, G. Tabor, H. Jasak, and C. Fureby, A tensorial approach to computational continuum mechanics using object-oriented techniques, Computers in physics, vol.12, issue.6, pp.620-631, 1998.

R. Lebas, T. Menard, P. Beau, A. Berlemont, and F. Demoulin, Numer910 ical simulation of primary break-up and atomization: Dns and modelling study, International Journal of Multiphase Flow, vol.35, issue.3, pp.247-260, 2009.

T. Menard, S. Tanguy, and A. Berlemont, Coupling level set/vof/ghost fluid methods: Validation and application to 3d simulation of the primary breakup of a liquid jet, International Journal of Multiphase Flow, vol.33, issue.5, pp.915-510, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00649785

J. Shinjo and A. Umemura, Simulation of liquid jet primary breakup: Dynamics of ligament and droplet formation, International Journal of Multiphase Flow, vol.36, issue.7, pp.513-532, 2010.

J. Shinjo and A. Umemura, Surface instability and primary atomization char920 acteristics of straight liquid jet sprays, International Journal of Multiphase Flow, vol.37, issue.10, pp.1294-1304, 2011.
DOI : 10.1016/j.ijmultiphaseflow.2011.08.002

F. A. Williams, Spray combustion and atomization, The Physics of Fluids, vol.1, issue.6, pp.541-545, 1958.
DOI : 10.1063/1.1724379

G. Bird, Molecular gas dynamics and the direct simulation of gas flows, p.925

F. Laurent and M. Massot, Multi-fluid modelling of laminar polydisperse spray flames: origin, assumptions and comparison of sectional and sampling methods, Combustion Theory and Modelling, vol.5, issue.4, pp.537-572, 2001.

F. Laurent, A. Sibra, and F. Doisneau, Two-size moment eulerian multi-fluid model: a flexible and realizable high-fidelity description of polydisperse moderately dense evaporating sprays, Communications in Computational Physics, vol.20, issue.4, pp.902-943, 2016.
DOI : 10.4208/cicp.300615.050216a
URL : https://hal.archives-ouvertes.fr/hal-01169730/file/Laurent_Sibra_Doisneau_final.pdf

C. Yuan, F. Laurent, and R. Fox, An extended quadrature method of moments 935 for population balance equations, Journal of Aerosol Science, vol.51, pp.1-23, 2012.
DOI : 10.1016/j.jaerosci.2012.04.003

D. A. Drew and S. L. Passman, Theory of multicomponent fluids, vol.135, 2006.
DOI : 10.1007/b97678

G. Blokkeel, B. Barbeau, and R. Borghi, A 3d eulerian model to improve the 940 primary breakup of atomizing jet, SAE Technical Paper, 2003.

A. Andreini, C. Bianchini, S. Puggelli, and F. Demoulin, Development of a turbulent liquid flux model for eulerian-eulerian multiphase flow simulations, International Journal of Multiphase Flow, vol.81, pp.88-103, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01611200

P. Beau, M. Funk, R. Lebas, and F. Demoulin, Applying quasi-multiphase 945 model to simulate atomization processes in diesel engines: Modeling of the slip velocity, Tech. rep., SAE Technical Paper, 2005.

J. Chesnel, J. Reveillon, T. Menard, and F. Demoulin, Large eddy simulation of liquid jet atomization, Atomization and Sprays, vol.21, issue.9, pp.711-736, 2011.
DOI : 10.1615/atomizspr.2012003740
URL : https://hal.archives-ouvertes.fr/hal-00767791

H. K. Versteeg and W. Malalasekera, An introduction to computational fluid 950 dynamics: the finite volume method, Pearson Education, 2007.

P. Sagaut, Large eddy simulation for incompressible flows: an introduction, 2006.
DOI : 10.1088/0957-0233/12/10/707
URL : http://cds.cern.ch/record/1250562/files/978-3-540-26403-3_BookTOC.pdf

J. Smagorinsky, General circulation experiments with the primitive equations: I. the basic experiment, Monthly weather review, vol.91, issue.3, pp.99-955, 1963.

F. Nicoud and F. Ducros, Subgrid-scale stress modelling based on the square of the velocity gradient tensor, Flow, turbulence and Combustion, vol.62, pp.183-200, 1999.

F. Ducros, F. Nicoud, and T. Poinsot, Wall-adapting local eddy-viscosity mod960 els for simulations in complex geometries, 1998.

C. E. Brennen, Fundamentals of multiphase flow, 2005.

H. G. Weller, A new approach to vof-based interface capturing methods for incompressible and compressible flow, OpenCFD Ltd, p.10, 2008.

F. Raees, D. Van-der-heul, and C. Vuik, Evaluation of the interface-capturing algorithm of openfoam for the simulation of incompressible immiscible twophase flow, Reports of the Department of Applied Mathematical Analysis, vol.11, issue.7, p.43, 2011.

C. Hirt and B. Nichols, Volume of fluid (vof) method for the dynamics of free boundaries, Journal of computational physics, vol.39, issue.1, pp.201-225, 1981.

M. Sussman, P. Smereka, and S. Osher, A level set approach for computing solutions to incompressible two-phase flow, Journal of Computational physics, vol.114, issue.1, pp.146-159, 1994.

R. P. Fedkiw, T. Aslam, B. Merriman, and S. Osher, A non-oscillatory eulerian approach to interfaces in multimaterial flows (the ghost fluid method), Journal of computational physics, vol.152, issue.2, pp.457-492, 1999.

D. W. Lee and R. C. Spencer, Photomicrographic studies of fuel sprays, pp.215-239, 1934.

R. E. Phinney, The breakup of a turbulent liquid jet in a gaseous atmosphere, Journal of Fluid Mechanics, vol.60, issue.04, pp.689-701, 1973.

J. W. Hoyt and J. Taylor, Waves on water jets, Journal of Fluid Mechanics, vol.83, issue.01, pp.119-127, 1977.
DOI : 10.1017/s0022112077001074

D. Ervine and H. Falvey, Behaviour of turbulent water jets in the atmosphere 985 and in plunge pools, Proceedings of the Institution of Civil engineers, vol.83, issue.1, pp.295-314, 1987.

G. Faeth, L. Hsiang, and P. Wu, Structure and breakup properties of sprays, International Journal of Multiphase Flow, vol.21, pp.99-127, 1995.
DOI : 10.1016/0301-9322(95)00059-7

F. Demoulin, P. Beau, G. Blokkeel, A. Mura, and R. Borghi, A new 990 model for turbulent flows with large density fluctuations: Application to liquid atomization, Atomization and Sprays, vol.17, issue.4, pp.315-345, 2007.
DOI : 10.1615/atomizspr.v17.i4.20

H. Jasak, Error analysis and estimation for the finite volume method with applications to fluid flows, p.396, 1996.

J. M. Desantes-fernández, J. M. Oliver, J. Pastor, and A. , Modelling and validation of near-field diesel spray cfd simulations based on the ?-y model, Ilass Europe. 28th european conference on Liquid Atomization and Spray Systems, pp.98-105, 2017.

Q. Xue, M. Battistoni, C. Powell, D. Longman, S. Quan et al., An eulerian cfd model and x-ray radiography for coupled nozzle flow and spray in internal combustion engines, International Journal of Multiphase Flow, vol.70, pp.77-88, 2015.
DOI : 10.1016/j.ijmultiphaseflow.2014.11.012
URL : https://manuscript.elsevier.com/S0301932214002328/pdf/S0301932214002328.pdf

S. Pope, An explanation of the turbulent round-jet/plane-jet anomaly, 1005 AIAA journal, vol.16, issue.3, pp.279-281, 1978.

A. Pandal, R. Payri, J. García-oliver, and J. Pastor, Optimization of spray break-up cfd simulations by combining ?-y eulerian atomization model with a response surface methodology under diesel engine-like conditions (ecn spray a), Computers & Fluids, vol.156, pp.9-20, 2017.

S. B. Pope, Ten questions concerning the large-eddy simulation of turbulent flows, New journal of Physics, vol.6, issue.1, p.35, 2004.

J. Fröhlich, C. P. Mellen, W. Rodi, L. Temmerman, and M. A. Leschziner, Highly resolved large-eddy simulation of separated flow in a channel with streamwise periodic constrictions, Journal of Fluid Mechanics, vol.526, pp.1015-1034, 2005.

H. Werner and H. Wengle, Large-eddy simulation of turbulent flow over and around a cube in a plate channel, Turbulent Shear Flows, vol.8, pp.155-168, 1993.

J. Roenby, H. Bredmose, and H. Jasak, A computational method for sharp 1020 interface advection, Open Science, vol.3, issue.11
DOI : 10.1098/rsos.160405
URL : http://rsos.royalsocietypublishing.org/content/3/11/160405.full.pdf

F. Denner, D. R. Van-der-heul, G. T. Oud, M. M. Villar, A. Da-silveira et al., Comparative study of mass-conserving interface cap1025 turing frameworks for two-phase flows with surface tension, International Journal of Multiphase Flow, vol.61, pp.37-47, 2014.
DOI : 10.1016/j.ijmultiphaseflow.2013.12.011

A. Ferrari, M. Magnini, and J. R. Thome, A flexible coupled level set and volume of fluid (flexclv) method to simulate microscale two-phase flow in non-uniform and unstructured meshes, International Journal of Multiphase, vol.1030, pp.276-295, 2017.

D. Fuster, A. Bagué, T. Boeck, L. Le-moyne, A. Leboissetier et al., Simulation of primary atomization with an octree adaptive mesh refinement and vof method, International Journal of Multiphase Flow, vol.35, issue.6, pp.550-565, 2009.
URL : https://hal.archives-ouvertes.fr/hal-01445430

N. Hecht, Simulation aux grandeséchellesgrandeséchelles desécoulementsdesécoulements liquide-gaz : applicationáapplicationá l'atomisation, 2014.

B. Duret, J. Reveillon, T. Menard, and F. Demoulin, Improving primary atomization modeling through dns of two-phase flows, International Journal of Multiphase Flow, vol.55, pp.130-137, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01596523

, Engine Combustion Network

J. Desantes, J. García-oliver, J. Pastor, A. Pandal, E. Baldwin et al., Coupled/decoupled spray simulation comparison of the ecn spray a condition with the ?-y eulerian atomization model, International Journal of Multiphase Flow, vol.80, pp.89-99, 2016.

J. M. Garcia-oliver, J. M. Pastor, A. Pandal, N. Trask, E. Baldwin et al.,

. Schmidt, Diesel spray cfd simulations based on the ?-y eulerian atomization model, Atomization and Sprays, vol.23, issue.1, pp.71-95, 2013.

. Demoulin, Subgrid liquid flux and interface modelling for les of atomization, Ilass Europe. 28th european conference on Liquid Atomization and Spray Systems, pp.385-393, 2017.
URL : https://hal.archives-ouvertes.fr/hal-02127293

A. L. Kastengren, F. Z. Tilocco, C. F. Powell, J. Manin, L. M. Pickett et al., Engine combustion network (ecn): measurements of 1055 nozzle geometry and hydraulic behavior, Atomization and Sprays, vol.22, issue.12, pp.1011-1052, 2012.

S. B. Pope, Turbulent flows, 2001.
URL : https://hal.archives-ouvertes.fr/hal-00712179

J. Matheis and S. Hickel, Multi-component vapor-liquid equilibrium model for les of high-pressure fuel injection and application to ecn spray a, Interna1060 tional, Journal of Multiphase Flow, vol.99, pp.294-311, 2018.

E. Knudsen, E. Doran, V. Mittal, J. Meng, and W. Spurlock, Compressible eulerian needle-to-target large eddy simulations of a diesel fuel injector, Proceedings of the Combustion Institute, vol.36, issue.2, pp.2459-2466, 2017.

G. Lacaze, A. Misdariis, A. Ruiz, and J. C. Oefelein, Analysis of high-pressure 1065 diesel fuel injection processes using les with real-fluid thermodynamics and transport, Proceedings of the Combustion Institute, vol.35, issue.2, pp.1603-1611, 2015.

, Engine combustion network | near-nozzle mixture derived from x-ray radiography

A. Kastengren, F. Tilocco, D. Duke, C. Powell, S. Moon et al., Timeresolved x-ray radiography of diesel injectors from the engine combustion network, ICLASS Paper, p.1369, 2012.

L. M. Pickett, J. Manin, A. Kastengren, and C. Powell, Comparison of near-field 1075 structure and growth of a diesel spray using light-based optical microscopy and x-ray radiography, SAE International Journal of Engines, vol.7, pp.1044-1053, 2014.

A. L. Kastengren, C. F. Powell, Y. Wang, K. Im, and J. Wang, X-ray radiography measurements of diesel spray structure at engine-like ambient 1080 density, Atomization and Sprays, vol.19, issue.11, pp.1031-1044, 2009.

R. Payri, S. Molina, F. Salvador, and J. Gimeno, A study of the relation between nozzle geometry, internal flow and sprays characteristics in diesel fuel injection systems, KSME International Journal, vol.18, issue.7, pp.1222-1235, 2004.

R. Payri, B. Tormos, J. Gimeno, and G. Bracho, The potential of large eddy 1085 simulation (les) code for the modeling of flow in diesel injectors, Mathematical and Computer Modelling, vol.52, issue.7-8, pp.1151-1160, 2010.

M. Sussman and E. G. Puckett, A coupled level set and volume-of-fluid method for computing 3d and axisymmetric incompressible two-phase flows, Journal of computational physics, vol.162, issue.2, pp.301-337, 2000.

L. Malbec, J. Egúsquiza, G. Bruneaux, and M. Meijer, Characterization of a set of ecn spray a injectors: nozzle to nozzle variations and effect on spray characteristics, SAE International Journal of Engines, vol.6, pp.1642-1660, 2013.