P. Aminti and L. Franco, Wave Overtopping on Rubble Mound Breakwaters, Coastal Engineering 1988, pp.770-781, 1988.
DOI : 10.1061/9780872626874.058

P. Bakker, M. Klabbers, M. Muttray, and A. Van-den-berge, Hydraulic performance of Xbloc ® armour units, 1th International Conference on Coastal Zone Management and Engineering in the Middle East, 2005.

A. P. Bradbury, N. W. Allsop, and R. V. Stephens, Hydraulic Performance of Breakwater Crown Walls, 1988.

T. Bruce, J. W. Van-der-meer, L. Franco, and J. M. Pearson, Overtopping performance of different armour units for rubble mound breakwaters, Coastal Engineering, vol.56, issue.2, pp.166-179, 2009.
DOI : 10.1016/j.coastaleng.2008.03.015

M. Buccino, M. Calabrese, F. Ciardulli, D. Pace, P. Tomasicchio et al., One layer concrete armor units with a rock-like skin: wave reflection and run-up, J. Coast Res, 2011.

H. F. Burcharth and Z. Liu, The Application of Load-Cell Technique in the Study of Armour Unit Responses to Impact Loads, Coastal Engineering 1994, pp.958-972, 1994.
DOI : 10.1061/9780784400890.071

H. F. Burcharth, Z. Liu, and P. Troch, Scaling of core material in rubble mound breakwaters model test, Proc. of the 5th International Conference on Coastal Engineering in Developing Countries (COPEDEC), Capetown, pp.1518-1528, 1999.

, Shore protection manual, Coastal Engineering Research Center, 1984.

C. , C. , and C. , The Rock Manual. The Use of Rock in Hydraulic Engineering, 2007.

S. Dupray and J. Roberts, Review of the use of concrete in the manufacture of concrete armour units, Proceeding International Conference of Coasts, Marine Structures and Breakwaters, pp.245-259, 2009.
DOI : 10.1680/cmsb.41301.0021

. Edesign, . Co, and . Uk, Piston coastal wave generators j Edinburgh Designs Available at, 2016.

E. Pullen, T. Allsop, N. W. Bruce, T. Kortenhaus, A. Schüttrumpf et al., Overtopping manual, wave overtopping of sea defences and related structures: assessment manual, 2007.

J. W. Eurotop, N. W. Allsop, T. Bruce, J. Derouck, A. Kortenhaus et al., Manual on wave overtopping of sea defences and related structures An overtopping manual largely based on European research, but for worldwide application, 2016.

M. E. G?mez-martín and J. R. Medina, DAMAGE PROGRESSION ON CUBE ARMORED BREAKWATERS, Coastal Engineering 2006, pp.5229-5240, 2006.
DOI : 10.1142/9789812709554_0438

L. Guo, J. P. Latham, and J. Xiang, Numerical simulation of breakages of concrete armour units using a three-dimensional fracture model in the context of the combined finite-discrete element method, Computers & Structures, vol.146, pp.117-142, 2015.
DOI : 10.1016/j.compstruc.2014.09.001

R. Y. Hudson, Laboratory investigation of rubble mound breakwaters, J. Waterw. Harb. Div, pp.93-121, 1959.

S. A. Hughes, Physical models and laboratory techniques in coastal engineering, In: Advanced Series on Ocean Engineering, vol.7, 1993.
DOI : 10.1142/2154

E. P. Mansard and E. R. Funke, The Measurement of Incident and Reflected Spectra Using a Least Squares Method, Coastal Engineering 1980, pp.154-172, 1981.
DOI : 10.1061/9780872622647.008

J. R. Medina, J. Molines, and M. E. Martín, Influence of armour porosity on the hydraulic stability of cube armour layers, Ocean Engineering, vol.88, pp.289-297, 2014.
DOI : 10.1016/j.oceaneng.2014.06.012

J. Molines and J. R. Medina, Calibration of overtopping roughness factors for concrete armor units in non-breaking conditions using the CLASH database, Coastal Engineering, vol.96, pp.62-70, 2015.
DOI : 10.1016/j.coastaleng.2014.11.008

J. M?-oller, A. Kortenhaus, H. Oumeraci, J. De-rouck, and J. R. Medina, Wave Run-up and Wave Overtopping on a Rubble Mound Breakwater-Comparison of Prototype and Laboratory Investigations Coastal Structures, pp.456-468, 2003.

M. W. Owen, Design of Seawalls Allowing for Wave Overtopping, 1980.

I. Safari, Analyse de la performance hydraulique d'un nouveau type de bloc artificiel utilis e pour la protection c^ oti ere, 2011.

I. Safari, D. Mouaz-e, F. Ropert, S. Haquin, and A. Ezersky, Influence du plan de pose sur les distributions de porosit e au sein d'une carapace de digue a talus, 2012.

E. Smolka, G. Zarranz, and J. R. Medina, Estudio Experimental del Rebase de un Dique en Talud de Cubípodos, Libro de las X Jornadas Espa~ nolas de Costas y Puertos. Universidad de Cantabria-Adif Congresos, pp.803-809, 2009.

, Technical Report Wave Run-up and Wave Overtopping at Dikes, TAW, 2002.

, Coastal Engineering Manual (CEM). U.S. Army Corps of Engineers, 2002.

R. V. Van-buchem, Stability of a Single Top Layer of Cubes. MSc-Thesis, 2009.

J. W. Van-der-meer, Design of concrete armour layers, Proc. Coastal Structures '99. A.A. Balkema, pp.213-221, 1999.

J. W. Van-der-meer and T. Bruce, New Physical Insights and Design Formulas on Wave Overtopping at Sloping and Vertical Structures, Journal of Waterway, Port, Coastal, and Ocean Engineering, vol.140, issue.6, 2014.
DOI : 10.1061/(ASCE)WW.1943-5460.0000221

J. W. Van-der-meer and J. P. Janssen, Wave Run-up and Wave Overtopping at Dikes, Delft Hydraulics No, 1994.

J. W. Van-der-meer and C. J. Stam, Wave Runup on Smooth and Rock Slopes of Coastal Structures, Journal of Waterway, Port, Coastal, and Ocean Engineering, vol.118, issue.5, pp.534-550, 1992.
DOI : 10.1061/(ASCE)0733-950X(1992)118:5(534)

M. R. Van-gent, H. F. Van-den-boogaard, B. Pozueta, and J. R. Medina, Neural network modelling of wave overtopping at coastal structures. Coast Eng, pp.586-593, 2007.

A. Vandenbosch, K. D. Angremond, H. J. Verhagen, and J. Olthof, INFLUENCE OF THE DENSITY OF PLACEMENT ON THE STABILITY OF ARMOUR LAYERS ON BREAKWATERS, Coastal Engineering 2002, pp.1537-1549, 2002.
DOI : 10.1142/9789812791306_0129

D. Vanneste and P. Troch, An improved calculation model for the wave-induced pore pressure distribution in a rubble-mound breakwater core, Coastal Engineering, vol.66, 2012.
DOI : 10.1016/j.coastaleng.2012.03.007

L. Victor and P. Troch, EXPERIMENTAL STUDY ON THE OVERTOPPING BEHAVIOUR OF STEEP SLOPES ??? TRANSITION BETWEEN MILD SLOPES AND VERTICAL WALLS, Proceedings of the 33th International Conference on Coastal Engineering, pp.1-23, 2012.
DOI : 10.9753/icce.v33.structures.61

G. Wolters, M. R. Van-gent, B. Hofland, and P. Wellens, Wave damping and permeability scaling in rubble mound breakwaters, Proc. Coastlab 2014, 2014.